Almost every sauna project starts with a photograph. A barrel on a deck at dusk, a curved cabin behind a glass wall, a black cube in a gym. The photograph is a fine place to start and a bad place to decide, because the shape of a sauna is not really an aesthetic choice. It is a decision about interior volume, bench layout, shipping cube and site access — and those four pull against each other.
Here is how we walk a buyer through it, using the three formats we build most.
The footprint is not the volume
A barrel and a square cabin can occupy the same square metres on a plan and feel nothing alike inside, because a circle wastes the corners.
| Format | Typical envelope | What the interior feels like | Bench geometry |
|---|---|---|---|
| Barrel | Ø2.1 m × 2.4 m long | Low at the shoulders on the sides, generous headroom only along the centre line | Stepped benches following the curve; lounging rather than sitting upright |
| Curved | 2000 × 2000 × 2000 mm | Full height across most of the floor; the curve is in the walls and roof, not the usable space | Straight bench along the flat back wall, upper and lower tier |
| Square / rectangular | From 1.5 × 1.2 m upward | Predictable. Every centimetre is usable and every wall is a mounting surface | L-shaped or two-tier, flat, easy to detail |
The practical consequence: a barrel that looks bigger on the deck than a 2 × 2 m cabin will often seat the same number of people, and it will seat them lying back rather than upright. If your market is commercial — hotel, spa, gym — upright seating and a clear standing height for cleaning matter more than the silhouette.
Where the heater goes
This is the constraint that surprises people. In a barrel, the heater sits in a corner or at one end, and the stove guard has to follow a curve. In a square cabin there is a flat wall, a straight guard and a defined safety distance that is trivial to document. In a curved cabin the stove usually goes against the one flat section.
If the unit is going into a regulated commercial installation, the flat wall is worth more than it looks: it makes the safety distances, the ventilation path and the guard fixing simple to draw and simple to inspect.
Shipping cube, and why it decides the price
This is the least romantic factor and the one that moves the landed cost most.
- Barrel ships as staves and steel hoops. A 2.1 m barrel flat-packs into a fraction of its assembled volume — typically a pallet-sized bundle rather than an overheight box. Container utilisation is excellent, which is why barrel saunas dominate long-distance export.
- Curved ships as pre-formed panels with a fixed radius. Panels do not nest. You are shipping air inside the curve, and the crate is bulky and overheight.
- Square ships as flat panels and nests well — nearly as efficient as the barrel, and easier to handle than either.
On a 40 HQ, the difference between a flat-packed format and a panel format is not a rounding error. It is often the difference between a viable retail price and a marginal one.
Site access is the hidden veto
A barrel can go through a 900 mm garden gate, one stave at a time, and be assembled in the garden. A one-piece curved cabin cannot. If the delivery route involves a lift, a stairwell, a courtyard door or a neighbour’s driveway, the flat-packed format wins before anyone discusses design.
Ask the question early: can a 2 m rigid box reach the final position? If the answer is no, the format is already decided.
Weather, water and the base of the curve
Outdoor barrels collect water and debris where the curve meets the ground, and the lower staves sit closest to damp. Detailing matters more than the shape here: a raised base, a drainage gap, and airflow under the floor. A square cabin on a levelled pad is more forgiving because the wall-to-ground junction is straightforward to flash and ventilate.
Neither format survives being set directly on soil. Both need a level, drained, load-bearing base — and the barrel needs slightly more attention to the first course of staves.
What our own production data says
Between 2023 and 2024 we delivered, cumulatively, around 500 barrel saunas at 2.1 × 2.1 × 2.4 m and around 300 curved saunas at 2000 × 2000 × 2000 mm. That ratio is not an accident of marketing: it reflects what ships well and what buyers reorder.
It also tells you something more useful than a brochure. The barrel jig is mature — stave profiles, hoop spacing and door fit are settled, and repeat orders come out identical. The curved format is a panel-build, so lead time and cost track the panel count and the radius tooling rather than a fixed recipe. If you are planning a range with several sizes, that difference shows up in your sampling budget.
Choosing, in five questions
| Question | Points to barrel | Points to curved | Points to square |
|---|---|---|---|
| How does it reach the site? | Narrow gate, stairs, tight garden | Only if access is wide and clear | Flat-pack, easiest of the three |
| Upright or lounging? | Lounging | Upright with a curved feel | Upright, predictable |
| Commercial or residential? | Residential, hospitality feature | Hospitality feature, spa | Gym, hotel, rental, commercial |
| Container economics | Best utilisation | Poorest | Good |
| Range complexity | Mature jig, repeatable | Panel count drives cost | Simplest to vary |
Timber, in all three
The format does not change the wood decision, which is usually the more consequential one for the end customer. We build in red cedar and in thermally modified spruce. Cedar is the traditional choice — lighter, naturally resistant, and it weathers to silver if left untreated. Thermally modified spruce avoids chemical treatment entirely, which matters in the German and Nordic markets, and holds its colour longer under a finish.
Pick the species for the market and the maintenance regime, then pick the format for the site. Doing it in the other order is how projects end up with a beautiful cabin that cannot get through the gate.
If you want the full comparison across all five formats we build, including cold plunge and the combined units, the selection matrix lays them out side by side. To price a specific configuration, send the envelope, the market and the quantity.